Difference between revisions of "Old Tomato"

From Nuclear Physics Group Documentation Pages
Jump to navigationJump to search
Line 1: Line 1:
== General Information ==
 
Okra is the monitoring server. Uses [[Cacti]] to do the monitoring, which currently operates questionably.
 
  
Hostnames: <code>okra.unh.edu</code>, <code>okra.farm.physics.unh.edu</code>
 
 
== Network Configuration ==
 
Currently has ethernet cable to switch, accessing outside world via the VLAN functions of the switch.
 
 
=== /etc/sysconfig/network-scripts/ifcfg-farm ===
 
<pre># Realtek|RTL-8169 Gigabit Ethernet
 
HWADDR=00:09:5B:BC:EC:C9
 
DEVICE=eth0
 
BOOTPROTO=none
 
IPADDR=10.0.0.246
 
NETMASK=255.255.255.0
 
ONBOOT=yes
 
TYPE=Ethernet
 
USERCTL=no
 
PEERDNS=yes
 
IPV6INIT=no
 
</pre>
 
=== /etc/sysconfig/network-scripts/ifcfg-unh ===
 
<pre># UNH network
 
VLAN=yes
 
DEVICE=eth0.2
 
BOOTPROTO=none
 
BROADCAST=132.177.91.255
 
IPADDR=132.177.88.73
 
NETMASK=255.255.252.0
 
NETWORK=132.177.88.0
 
ONBOOT=yes
 
REORDER_HDR=no
 
GATEWAY=132.177.88.1
 
TYPE=Ethernet
 
USERCTL=no
 
PEERDNS=yes
 
IPV6INIT=no
 
</pre>
 
=== /etc/sysconfig/network-scripts/ifcfg-lo ===
 
<pre>DEVICE=lo
 
IPADDR=127.0.0.1
 
NETMASK=255.0.0.0
 
NETWORK=127.0.0.0
 
# If you're having problems with gated making 127.0.0.0/8 a martian,
 
# you can change this to something else (255.255.255.255, for example)
 
BROADCAST=127.255.255.255
 
ONBOOT=yes
 
NAME=loopback
 
</pre>
 
== Access Configuration ==
 
=== /etc/security/access.conf ===
 
<pre># NPG Config:
 
# Allow direct root logins only from console and einstein
 
+ : root : LOCAL einstein.unh.edu einstein.farm.physics.unh.edu lentil.unh.edu lentil.farm.physics.unh.edu
 
 
# Allow only NPG users and administrators
 
- : ALL EXCEPT npg domain_admins : ALL
 
</pre>
 
== Backup Configuration ==
 
=== /etc/rsync-backup.conf ===
 
<pre># Backups are 'pull' only.  Too bad there isn't a better way to enforce this.
 
read only      = yes
 
 
# Oh for the ability to retain CAP_DAC_READ_SEARCH, and no other. 
 
#uid            = root
 
# XXX There seems to be an obscure bug with pam_ldap and rsync whereby
 
# getpwnam(3) segfaults when (and only when) archiving /etc.  Using a numeric
 
# uid avoids this bug.  Only verified on Fedora Core 2.
 
uid            = 0
 
 
# There's not much point in putting the superuser in a chroot jail
 
# use chroot    = yes
 
 
# This isn't really an effective "lock" per se, since the value is per-module,
 
# but there really ought never be more than one, and it would at least
 
# ensure serialized backups.
 
max connections = 1
 
 
[usr_local]
 
        path    = /usr/local
 
        comment = unpackaged software
 
 
[opt]
 
        path    = /opt
 
        comment = unpackaged software
 
 
[etc]
 
        path    = /etc
 
        comment = conf files
 
 
[var]
 
        path    = /var
 
        comment = user and system storage
 
</pre>
 
== SNMP Configuration ==
 
=== /etc/snmp/snmpd.conf ===
 
<pre>###############################################################################
 
#
 
# snmpd.conf:
 
#  An example configuration file for configuring the ucd-snmp snmpd agent.
 
#
 
###############################################################################
 
#
 
# This file is intended to only be as a starting point.  Many more
 
# configuration directives exist than are mentioned in this file.  For
 
# full details, see the snmpd.conf(5) manual page.
 
#
 
# All lines beginning with a '#' are comments and are intended for you
 
# to read.  All other lines are configuration commands for the agent.
 
 
###############################################################################
 
# Access Control
 
###############################################################################
 
 
# As shipped, the snmpd demon will only respond to queries on the
 
# system mib group until this file is replaced or modified for
 
# security purposes.  Examples are shown below about how to increase the
 
# level of access.
 
 
# By far, the most common question I get about the agent is "why won't
 
# it work?", when really it should be "how do I configure the agent to
 
# allow me to access it?"
 
#
 
# By default, the agent responds to the "public" community for read
 
# only access, if run out of the box without any configuration file in
 
# place.  The following examples show you other ways of configuring
 
# the agent so that you can change the community names, and give
 
# yourself write access to the mib tree as well.
 
#
 
# For more information, read the FAQ as well as the snmpd.conf(5)
 
# manual page.
 
 
##      sec.name  source          community
 
com2sec local    127.0.0.1      NPG
 
com2sec mynetwork 10.0.0.0/24      NPG
 
 
##    group.name sec.model  sec.name
 
group MyRWGroup v1        local
 
group MyRWGroup v2c        local
 
group MyRWGroup usm        local
 
group MyROGroup v1        mynetwork
 
group MyROGroup v2c        mynetwork
 
group MyROGroup usm        mynetwork
 
 
##          incl/excl subtree                          mask
 
view all    included  .1                              80
 
 
## -or just the mib2 tree-
 
 
#view mib2  included  .iso.org.dod.internet.mgmt.mib-2 fc
 
 
 
##                context sec.model sec.level prefix read  write  notif
 
access MyROGroup ""      any      noauth    0      all    none  none
 
access MyRWGroup ""      any      noauth    0      all    all    all
 
 
 
###############################################################################
 
# Sample configuration to make net-snmpd RFC 1213.
 
# Unfortunately v1 and v2c don't allow any user based authentification, so
 
# opening up the default config is not an option from a security point.
 
#
 
# WARNING: If you uncomment the following lines you allow write access to your
 
# snmpd daemon from any source! To avoid this use different names for your
 
# community or split out the write access to a different community and
 
# restrict it to your local network.
 
# Also remember to comment the syslocation and syscontact parameters later as
 
# otherwise they are still read only (see FAQ for net-snmp).
 
#
 
 
# First, map the community name "public" into a "security name"
 
#      sec.name        source          community
 
#com2sec notConfigUser  default        public
 
 
# Second, map the security name into a group name:
 
#      groupName      securityModel  securityName
 
#group  notConfigGroup  v1              notConfigUser
 
#group  notConfigGroup  v2c            notConfigUser
 
 
# Third, create a view for us to let the group have rights to:
 
# Open up the whole tree for ro, make the RFC 1213 required ones rw.
 
#      name            incl/excl      subtree mask(optional)
 
#view    roview          included        .1
 
#view    rwview          included        system.sysContact
 
#view    rwview          included        system.sysName
 
#view    rwview          included        system.sysLocation
 
#view    rwview          included        interfaces.ifTable.ifEntry.ifAdminStatus
 
#view    rwview          included        at.atTable.atEntry.atPhysAddress
 
#view    rwview          included        at.atTable.atEntry.atNetAddress
 
#view    rwview          included        ip.ipForwarding
 
#view    rwview          included        ip.ipDefaultTTL
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteDest
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteMetric1
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteMetric2
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteMetric3
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteMetric4
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteType
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteAge
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteMask
 
#view    rwview          included        ip.ipRouteTable.ipRouteEntry.ipRouteMetric5
 
#view    rwview          included        ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex
 
#view    rwview          included        ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
 
#view    rwview          included        ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress
 
#view    rwview          included        ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType
 
#view    rwview          included        tcp.tcpConnTable.tcpConnEntry.tcpConnState
 
#view    rwview          included        egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger
 
#view    rwview          included        snmp.snmpEnableAuthenTraps
 
 
# Finally, grant the group read-only access to the systemview view.
 
#      group          context sec.model sec.level prefix read  write  notif
 
#access  notConfigGroup ""      any      noauth    exact  roview rwview none
 
 
 
 
###############################################################################
 
# System contact information
 
#
 
 
# It is also possible to set the sysContact and sysLocation system
 
# variables through the snmpd.conf file:
 
 
syslocation On the Farm
 
syscontact Root <root@physics.unh.edu>
 
 
# Example output of snmpwalk:
 
#  % snmpwalk -v 1 localhost -c public system
 
#  system.sysDescr.0 = "SunOS name sun4c"
 
#  system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
 
#  system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
 
#  system.sysContact.0 = "Me <me@somewhere.org>"
 
#  system.sysName.0 = "name"
 
#  system.sysLocation.0 = "Right here, right now."
 
#  system.sysServices.0 = 72
 
 
 
# -----------------------------------------------------------------------------
 
 
 
###############################################################################
 
# Process checks.
 
#
 
#  The following are examples of how to use the agent to check for
 
#  processes running on the host.  The syntax looks something like:
 
#
 
#  proc NAME [MAX=0] [MIN=0]
 
#
 
#  NAME:  the name of the process to check for.  It must match
 
#        exactly (ie, http will not find httpd processes).
 
#  MAX:  the maximum number allowed to be running.  Defaults to 0.
 
#  MIN:  the minimum number to be running.  Defaults to 0.
 
 
#
 
#  Examples (commented out by default):
 
#
 
 
#  Make sure mountd is running
 
#proc mountd
 
 
#  Make sure there are no more than 4 ntalkds running, but 0 is ok too.
 
#proc ntalkd 4
 
 
#  Make sure at least one sendmail, but less than or equal to 10 are running.
 
#proc sendmail 10 1
 
 
#  A snmpwalk of the process mib tree would look something like this:
 
#
 
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
 
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
 
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
 
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
 
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
 
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
 
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
 
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
 
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
 
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
 
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
 
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
 
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
 
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
 
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
 
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
 
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
 
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
 
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
 
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
 
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
 
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
 
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
 
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
 
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
 
#
 
#  Note that the errorFlag for mountd is set to 1 because one is not
 
#  running (in this case an rpc.mountd is, but thats not good enough),
 
#  and the ErrMessage tells you what's wrong.  The configuration
 
#  imposed in the snmpd.conf file is also shown. 
 
#
 
#  Special Case:  When the min and max numbers are both 0, it assumes
 
#  you want a max of infinity and a min of 1.
 
#
 
 
 
# -----------------------------------------------------------------------------
 
 
 
###############################################################################
 
# Executables/scripts
 
#
 
 
#
 
#  You can also have programs run by the agent that return a single
 
#  line of output and an exit code.  Here are two examples.
 
#
 
#  exec NAME PROGRAM [ARGS ...]
 
#
 
#  NAME:    A generic name.
 
#  PROGRAM:  The program to run.  Include the path!
 
#  ARGS:    optional arguments to be passed to the program
 
 
# a simple hello world
 
 
#exec echotest /bin/echo hello world
 
 
# Run a shell script containing:
 
#
 
# #!/bin/sh
 
# echo hello world
 
# echo hi there
 
# exit 35
 
#
 
# Note:  this has been specifically commented out to prevent
 
# accidental security holes due to someone else on your system writing
 
# a /tmp/shtest before you do.  Uncomment to use it.
 
#
 
#exec shelltest /bin/sh /tmp/shtest
 
 
# Then,
 
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
 
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
 
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
 
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
 
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
 
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
 
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
 
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
 
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
 
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
 
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
 
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
 
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
 
 
# Note that the second line of the /tmp/shtest shell script is cut
 
# off.  Also note that the exit status of 35 was returned.
 
 
# -----------------------------------------------------------------------------
 
 
 
###############################################################################
 
# disk checks
 
#
 
 
# The agent can check the amount of available disk space, and make
 
# sure it is above a set limit. 
 
 
# disk PATH [MIN=100000]
 
#
 
# PATH:  mount path to the disk in question.
 
# MIN:  Disks with space below this value will have the Mib's errorFlag set.
 
#        Default value = 100000.
 
 
# Check the / partition and make sure it contains at least 10 megs.
 
 
disk / 10000
 
disk /data 10000
 
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
 
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
 
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
 
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
 
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
 
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
 
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
 
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
 
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
 
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
 
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
 
 
# -----------------------------------------------------------------------------
 
 
 
###############################################################################
 
# load average checks
 
#
 
 
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
 
#
 
# 1MAX:  If the 1 minute load average is above this limit at query
 
#        time, the errorFlag will be set.
 
# 5MAX:  Similar, but for 5 min average.
 
# 15MAX:  Similar, but for 15 min average.
 
 
# Check for loads:
 
#load 12 14 14
 
 
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
 
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
 
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
 
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
 
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
 
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
 
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
 
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
 
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
 
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
 
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
 
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
 
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
 
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
 
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
 
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
 
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
 
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
 
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
 
 
# -----------------------------------------------------------------------------
 
 
 
###############################################################################
 
# Extensible sections.
 
#
 
 
# This alleviates the multiple line output problem found in the
 
# previous executable mib by placing each mib in its own mib table:
 
 
# Run a shell script containing:
 
#
 
# #!/bin/sh
 
# echo hello world
 
# echo hi there
 
# exit 35
 
#
 
# Note:  this has been specifically commented out to prevent
 
# accidental security holes due to someone else on your system writing
 
# a /tmp/shtest before you do.  Uncomment to use it.
 
#
 
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
 
 
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
 
# enterprises.ucdavis.50.1.1 = 1
 
# enterprises.ucdavis.50.2.1 = "shelltest"
 
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
 
# enterprises.ucdavis.50.100.1 = 35
 
# enterprises.ucdavis.50.101.1 = "hello world."
 
# enterprises.ucdavis.50.101.2 = "hi there."
 
# enterprises.ucdavis.50.102.1 = 0
 
 
# Now the Output has grown to two lines, and we can see the 'hi
 
# there.' output as the second line from our shell script.
 
#
 
# Note that you must alter the mib.txt file to be correct if you want
 
# the .50.* outputs above to change to reasonable text descriptions.
 
 
# Other ideas:
 
#
 
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
 
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
 
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
 
 
# -----------------------------------------------------------------------------
 
 
 
###############################################################################
 
# Pass through control.
 
#
 
 
# Usage:
 
#  pass MIBOID EXEC-COMMAND
 
#
 
# This will pass total control of the mib underneath the MIBOID
 
# portion of the mib to the EXEC-COMMAND. 
 
#
 
# Note:  You'll have to change the path of the passtest script to your
 
# source directory or install it in the given location.
 
#
 
# Example:  (see the script for details)
 
#          (commented out here since it requires that you place the
 
#          script in the right location. (its not installed by default))
 
 
# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest
 
 
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
 
# enterprises.ucdavis.255.1 = "life the universe and everything"
 
# enterprises.ucdavis.255.2.1 = 42
 
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
 
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
 
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
 
# enterprises.ucdavis.255.5 = 42
 
# enterprises.ucdavis.255.6 = Gauge: 42
 
#
 
# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
 
# enterprises.ucdavis.255.5 = 42
 
#
 
# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
 
# enterprises.ucdavis.255.1 = "New string"
 
#
 
 
# For specific usage information, see the man/snmpd.conf.5 manual page
 
# as well as the local/passtest script used in the above example.
 
 
# Added for support of bcm5820 cards.
 
pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat
 
 
###############################################################################
 
# Further Information
 
#
 
#  See the snmpd.conf manual page, and the output of "snmpd -H".
 
</pre>
 

Revision as of 20:13, 11 June 2009