Pepper

This page is currently being updated.

General Information

Pepper is a data server.

Hardware Information

HDD Space: 2.5 TB
Memory: 4 GB
CPU: AMD Opteron(tm) Processor 275
RAID Cont: Silicon Image, Inc. SiI 3114

Network Configuration

Currently connected to the unh and farm networks via the switch and VLAN configuration.

eth0 
  Hostname: Pepper.farm.physics.unh.edu      
  HWaddr 00:E0:81:40:2B:CD  
  IP:10.0.0.252

eth0.2
  Hostname: Pepper.unh.edu
  HWaddr 00:E0:81:40:2B:CC  
  IP:132.177.88.75

Backup Configuration

This machine is currently setup to backup certain data to lentil (backup server).

UPS Configuration

This machine is setup with a UPS, and is attached through a USB cable. This setup is currently not working at the moment, because of problems trying to use Bulldog or NUT to connect via USB with the UPSes.

Smartd Configuration

This configuration is set to send out a Health message to npg-admins along with a report of the status of each drive, and is set to run a check every week, this might change in the future. An example of one of the configuration line is:

 /dev/twa0 -d 3ware,7 -H -m npg-admins@physics.unh.edu