Difference between revisions of "Upgrading Endeavour"
From Nuclear Physics Group Documentation Pages
Jump to navigationJump to search (→Done) |
(→To Do) |
||
| Line 29: | Line 29: | ||
** See: http://docs.adaptivecomputing.com/hpc/7-1-0/basic/Content/topics/1-installation/installingTorque.htm | ** See: http://docs.adaptivecomputing.com/hpc/7-1-0/basic/Content/topics/1-installation/installingTorque.htm | ||
** See: http://www.adaptivecomputing.com/support/download-center/torque-download/ | ** See: http://www.adaptivecomputing.com/support/download-center/torque-download/ | ||
| − | |||
*** Note: The current version 4.0 does not play nice with older versions so we need to upgrade the ENTIRE pbs system to the new version. | *** Note: The current version 4.0 does not play nice with older versions so we need to upgrade the ENTIRE pbs system to the new version. | ||
*** Perhaps install 2.x first? -- YES. The 4.0 will not install on the master node because we cannot get to the RedHat repos to install openssl. | *** Perhaps install 2.x first? -- YES. The 4.0 will not install on the master node because we cannot get to the RedHat repos to install openssl. | ||
| + | *** -- NO. The 2.x does not talk with the PBS on endeavour. The entire system needs to be uniform. | ||
| + | *** Bump Endeavour over to CENTOS 5: see http://wiki.centos.org/HowTos/MigrationGuide | ||
Revision as of 02:52, 2 April 2015
Upgrading Endeavour nodes to Centos 6 started March 17, 2015 with node2:
- Reboot Node2 from a USB key with Centos6 distribution installed. Chose "minimal install"
- Note: Should have added scp, i.e openssh-client stuff. Added this "by hand" by using from endeavour: cat openssh-client-... | ssh node2 "cat - > openssh-client.rpm" and then installing that rpm.
- SSH into the system
- Copy the Centos ISO to node2 with scp. Mount on /mnt/centos
- Install packages with: yum --disablerepo \* --enablerepo c6-media install
- List of old package installed are in ~root/new_packages.txt with the distribution and package version stripped already. From this list, the packages were filtered into "installed" and "available" with yum. From the resulting list of "available" only the x86_64 and noarch packages were installed.
Done
- Initial installation of system
- Update the ethernet configuration (eth0) to 10.0.0.2 and onboot=yes.
- Install all previously installed packages
- setup ssh for passwordless entry. See: http://itg.chem.indiana.edu/inc/wiki/software/openssh/189.html or http://en.wikibooks.org/wiki/OpenSSH/Cookbook/Host-based_Authentication
- Note: Endeavour identifies as master.farm.physics.unh.edu, and so this needs to be in the ssh_known_hosts file and in the shosts.equiv file and .shosts file.
- Configure authentication: see SSSD
- Synchronise clock with endeavour: rdate -s endeavour && hwclock --systohc
- Configure automount: Frankly, it is a mystery why it works, since the setup seems incomplete, but hey, I won't complain.
- Configure Infiniband
- See: http://pkg-ofed.alioth.debian.org/howto/infiniband-howto-4.html includes a number of tests. All passed.
- See: https://pkg-ofed.alioth.debian.org/howto/infiniband-howto-5.html -- tested OK.
- See: https://access.redhat.com/solutions/301643
- Note: The ib0 does not seem to come up automatically? Needs to be checked.
To Do
- Configure MPI
- Later. I'm not sure anyone is using this right now.
- Configure open PBS - not an RPM
- See: http://docs.adaptivecomputing.com/hpc/7-1-0/basic/Content/topics/1-installation/installingTorque.htm
- See: http://www.adaptivecomputing.com/support/download-center/torque-download/
- Note: The current version 4.0 does not play nice with older versions so we need to upgrade the ENTIRE pbs system to the new version.
- Perhaps install 2.x first? -- YES. The 4.0 will not install on the master node because we cannot get to the RedHat repos to install openssl.
- -- NO. The 2.x does not talk with the PBS on endeavour. The entire system needs to be uniform.
- Bump Endeavour over to CENTOS 5: see http://wiki.centos.org/HowTos/MigrationGuide
