From Nuclear Physics Group Documentation Pages
Jump to navigationJump to search
|
|
Line 1: |
Line 1: |
− | == General Information ==
| + | This is the new Gourd Hardware. The old one is here [[old gourd]] |
− | Data server.
| |
− | Has 3dm raid monitoring and web interface installed and set up, accessible at [http://gourd.unh.edu:888].
| |
− | | |
− | == Hardware Information ==
| |
− | <pre>
| |
− | HDD Space: 1.6 TB
| |
− | Memory: 2 GB
| |
− | CPU: AMD Opteron(tm) Processor 244
| |
− | RAID Cont: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378), 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID
| |
− | </pre>
| |
− | | |
− | == Network Configuration ==
| |
− | Currently connected to the unh and farm networks via the switch and VLAN configuration.
| |
− | | |
− | <pre>
| |
− | eth0
| |
− | Hostname: Gourd.farm.physics.unh.edu
| |
− | HWaddr 00:E0:81:52:7A:79
| |
− | IP:10.0.0.252
| |
− | | |
− | eth0.2
| |
− | Hostname: Gourd.unh.edu
| |
− | HWaddr 00:E0:81:52:7A:79
| |
− | IP:132.177.88.75
| |
− | </pre>
| |
− | == Backup Configuration ==
| |
− | This machine is currently setup to backup certain data to lentil (backup server). | |
− | == UPS Configuration ==
| |
− | This machine is setup with a UPS, and is attached through a USB cable. This setup is currently not working at the moment, because of problems trying to use Bulldog or NUT to connect via USB with the UPSes.
| |
− | == Smartd Configuration ==
| |
− | This is set to run a test on each drive every two hours on saturday 1:00 AM to 3:00 PM and then send an email to npg-admins on the state of the drives.
| |
− | Example of a line in the smartd.conf that should be noted is:
| |
− | /dev/sda -d 3ware,0 -a -s L/../../7/01
| |
− | == rc.local Configuration ==
| |
− | The /etc/rc.local file is setup to email npg-admins the /var/log/boot.log file everytime the machine boots. | |
Revision as of 13:49, 11 December 2009
This is the new Gourd Hardware. The old one is here old gourd