Difference between revisions of "Cryogen Liquid Level Monitors"
From Nuclear Physics Group Documentation Pages
Jump to navigationJump to search| (3 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
The liquid nitrogen level meter probe is a Magnex Scientific E5031. The probe is a continuous analog readout of the liquid nitrogen level. The active sensor area of the probe is approximately 1 meter. Read-out of the probe is done via a "hockey-puck" like attachment that screws into the top of the ~1m long probe rod. The probe is calibrated using a combination of a Zero offset adjustment on the hockey-puck and Gain adjustment on the back of the analog read-out. Typically the meter is calibrated using a known liquid level. The ammonia sample dewar is a good place to calibrate the liquid level if you think it is off. We usually only use the meter as a rough estimate of the liquid level so the calibration doesn't have to be super precise. | The liquid nitrogen level meter probe is a Magnex Scientific E5031. The probe is a continuous analog readout of the liquid nitrogen level. The active sensor area of the probe is approximately 1 meter. Read-out of the probe is done via a "hockey-puck" like attachment that screws into the top of the ~1m long probe rod. The probe is calibrated using a combination of a Zero offset adjustment on the hockey-puck and Gain adjustment on the back of the analog read-out. Typically the meter is calibrated using a known liquid level. The ammonia sample dewar is a good place to calibrate the liquid level if you think it is off. We usually only use the meter as a rough estimate of the liquid level so the calibration doesn't have to be super precise. | ||
| + | Description of images (starting top left and working clockwise): | ||
| + | |||
| + | *1. Front of the Magnex Scientific LN2 Liquid Level and AMI Model 135 Liquid Helium Level Monitor. We currently do not use the Magnex E5011 Monitor. | ||
| + | *2. Back of the Magnex Scientific LN2 Liquid Level and AMI Model 135 Liquid Helium Level Monitor. The gain for the LN2 monitor is adjusted using a small screw driver. The cable labeled LHe J1 for the AMI sensor originates in the 35 pin connector on top of the blue AMI magnet dewar. | ||
| + | *3. The hockey puck attachment for the E5031 LN2 probe. The puck is attached to the probe rod in this picture. | ||
| + | *4. The LN2 probe cable that attaches to the base of the hockey puck. | ||
| + | *5. The LN2 probe cable that attaches to the back of the read-out electronics. | ||
| + | *6. The zero offset adjustment on the hockey puck. This is changed with a small screw driver. | ||
[[Image:FrontofLevelMeters.jpg|400px]] [[Image:BackofLevelMeters.jpg|400px]] [[Image:HockeyPuck.jpg|400px]] | [[Image:FrontofLevelMeters.jpg|400px]] [[Image:BackofLevelMeters.jpg|400px]] [[Image:HockeyPuck.jpg|400px]] | ||
| − | [[Image:LN2Cable_2.jpg|400px]] [[Image:LN2Cable.jpg|400px]][[Image:ZeroAdjust.jpg|400px]] | + | [[Image:LN2Cable_2.jpg|400px]] [[Image:LN2Cable.jpg|400px]] [[Image:ZeroAdjust.jpg|400px]] |
== LHe Level Meter: == | == LHe Level Meter: == | ||
Latest revision as of 15:45, 27 January 2017
LN2 Level Meter:
The liquid nitrogen level meter probe is a Magnex Scientific E5031. The probe is a continuous analog readout of the liquid nitrogen level. The active sensor area of the probe is approximately 1 meter. Read-out of the probe is done via a "hockey-puck" like attachment that screws into the top of the ~1m long probe rod. The probe is calibrated using a combination of a Zero offset adjustment on the hockey-puck and Gain adjustment on the back of the analog read-out. Typically the meter is calibrated using a known liquid level. The ammonia sample dewar is a good place to calibrate the liquid level if you think it is off. We usually only use the meter as a rough estimate of the liquid level so the calibration doesn't have to be super precise.
Description of images (starting top left and working clockwise):
- 1. Front of the Magnex Scientific LN2 Liquid Level and AMI Model 135 Liquid Helium Level Monitor. We currently do not use the Magnex E5011 Monitor.
- 2. Back of the Magnex Scientific LN2 Liquid Level and AMI Model 135 Liquid Helium Level Monitor. The gain for the LN2 monitor is adjusted using a small screw driver. The cable labeled LHe J1 for the AMI sensor originates in the 35 pin connector on top of the blue AMI magnet dewar.
- 3. The hockey puck attachment for the E5031 LN2 probe. The puck is attached to the probe rod in this picture.
- 4. The LN2 probe cable that attaches to the base of the hockey puck.
- 5. The LN2 probe cable that attaches to the back of the read-out electronics.
- 6. The zero offset adjustment on the hockey puck. This is changed with a small screw driver.
