Difference between revisions of "Taro"
From Nuclear Physics Group Documentation Pages
Jump to navigationJump to searchLine 13: | Line 13: | ||
TYPE=Ethernet | TYPE=Ethernet | ||
=== /etc/sysconfig/network-scripts/ifcfg-farm === | === /etc/sysconfig/network-scripts/ifcfg-farm === | ||
− | + | <pre># Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet | |
− | + | DEVICE=farm | |
− | + | ONBOOT=yes | |
− | + | BOOTPROTO=none | |
− | + | IPADDR=10.0.0.247 | |
− | + | NETMASK=255.255.255.0 | |
− | + | HWADDR=00:0C:76:18:49:6C | |
+ | USERCTL=no | ||
+ | IPV6INIT=no | ||
+ | PEERDNS=yes | ||
+ | TYPE=Ethernet | ||
+ | </pre> | ||
+ | |||
=== /etc/sysconfig/network-scripts/ifcfg-lo === | === /etc/sysconfig/network-scripts/ifcfg-lo === | ||
DEVICE=lo | DEVICE=lo |
Revision as of 18:33, 22 June 2007
General Information
Taro does something.
Network Configuration
Currently has ethernet cable to switch for local (farm) connection, and an ethernet cable to the wall for unh connection.
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 BOOTPROTO=static HWADDR=00:0C:76:18:49:6D IPADDR=132.177.88.86 NETMASK=255.255.252.0 ONBOOT=yes TYPE=Ethernet
/etc/sysconfig/network-scripts/ifcfg-farm
# Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet DEVICE=farm ONBOOT=yes BOOTPROTO=none IPADDR=10.0.0.247 NETMASK=255.255.255.0 HWADDR=00:0C:76:18:49:6C USERCTL=no IPV6INIT=no PEERDNS=yes TYPE=Ethernet
/etc/sysconfig/network-scripts/ifcfg-lo
DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback