View source for Kyle's Log

=Progress and Task Log for Kyle=


==In Progress==
*Implementing scale to zoom paning, including pushbutton interface.
*Push buttion zoom
*Make sure we can rotate 2pi in both theta and phi
*Fix phi

*Got Griffith's Particles. Sam has an excellent book on hardware by W. R. Leo

===Tasks===
*Get tasks from Maurik
*Learn the XML, build a primer so we can set up simple test strips.
*GEMC simulation beginner's guide
*Simulating single SVT, in GEMC.
**Geometry built
**Photoelectric finangles

==Notes==

===Colors!===

===Log===

====October====
'''Tue 23'''
<pre>
Off clock - building Sim12 on Fedora 7, some linking errors with JGeant4

Arrived 12pm
Familiarizing with batch mode, xml files
Put together common batch mode commands from http://clasweb.jlab.org/wiki/index.php/Sim12_Manual.
Creating log for hours, things done.
Read SVT and silicon detector papers
Out 3:00pm

tonight: more reading, fix linking problem
</pre>

'''Thur 25'''
<pre>
Off clock - picking up Introduction to Elementary Particles by Griffiths today or tomorrow.

Arrived 12pm
Reading through HDDS-1_0.xsd - XML documentation
Put together a simulation with just 2 SVTs (or maybe 1 double layered SVT) and a target.
Simulation runs a LOT faster with reduced geometry.

Wrote XML guide.
Left 2:45pm
</pre>

'''Fri 26'''
<pre>
Off clock - picking up Introduction to Elementary Particles by Griffiths today or tomorrow.

Arrived 10am
Set up single 'strip' simulation. Trying to figure out color meaning.
Color crazy! Perhaps seperated by charge, optical or 'other' emag radiation. All leptons so far are red.
Note: I do not get the vertical red lines I did when first running the simulation. Perhaps there is too
much geometry when the entire site is loaded and it breaks?

Applying fields to the region. (Uniform) Seem to have some effect on charged particles in jets but not
in incoming beam...not much of an effect though. Need to run more tests, check field strength. I don't think
it's doing anything.

Rotation in the phi dimension is broken for theta = 0.

Sim12 registered hit for an optical photon, gave lots of nice information. Hasn't done that for other
particle hits. Trying to get Sim12 to dump particle info to a file rather than just the terminal.
Out - 12:30pm
</pre>

====November====

'''Mon 5'''
<pre>
Arrived 10:30AM
Will G4 simulate semicondcutor SVT? - should...simulates photoelectric effect
Building detector piece as descriped in the diagrom in the SVT notes. Fixing geometry.
Out 12:15PM
</pre>

'''Wed 7'''
<pre>
Arrived 10:00AM
It seems references to geometry in the xml files use the center of a volume for it's
referencing index. I've built the first layer of the SVT cross section. What are we
using for n, n+, and p+? Spoke to Sam about this, he will get back to me.

For the laser test-bed we are trying to assemble:
Is this laserlight polarized? Geant4 cannot yet simulate
polarized light.

Trying to simulate photoelectric effect.
-what is the opticalphoton wavelength -controlled by energy?
Out 12:30pm
</pre>

'''Fri 9'''
<pre>
Arrived 10:15AM
Met with Sam on thursday, he recommended a great detector book, explaining the + designation on p and n semiconductors.
I spoke with grad student Georgi Nenchev on Solid State physics, and he recommended I pick up a book.
Modeling SVT from the cross section.
What semiconductor materials are we using? (notes: p-gallium,boron,indium n-arsenic,phosphorus,antimony)
How must the geometry be defined for pn junctions?
out 12:45pm
</pre>

'''Wed 14'''
<pre>
Arrived 10:15AM
Got scons, qt4, already have mysql, geant4 and python. Building qt4. Need gemc source. Filled out early time sheet.
Out 12:45PM
</pre>

'''Thur 15'''
<pre>
Arrived 12:30PM
Needed to set some env vars. Had to recompile qt4 with mysql support, recycling geant4 in sim12 build for gemc.
Lunch/Class Out: 2:15PM 

Arrived 5:00PM
make install qt - still getting mysql errors. Rebuild scons.
Out 6:15pm
</pre>

'''Fri 16'''
<pre>
Arrived 9:00AM
Still getting MYSQL errors. Needed to export MYSQL=/. Getting a library error.
Looking at G4 source. Trying to implement a simple log. I see references to a file stream named LOG_MSG in gemc's source but can't find the file.
Out: 11:30PM
</pre>


'''Wed 19'''
<pre>
Arrived 10:00AM
Compiled GEMC with maurizio's file logging, it works just fine. Checking out the source, brushing up on Qt4
Out: 11:30PM
</pre>

'''Mon 26'''
<pre>
Arrived 10:15AM
Implemented panning with respect to zoom. Compiles fine, but I can't test it as Maurizio must be playing with the geometry server. Implementing buttons for panning.
Out: 12:45PM
</pre>

'''Tue 27'''
<pre>
Arrived 12:30AM
Implemented test button for panning. Again, geometry server is not functioning, so I can't really test it yet. Trying to compile new version of GEMC, getting EVIO errors
on building.

Just tested, scale to zoom panning works great!
Button isn't working. I don't know if I can pass an argument to a function using a slot.
Created seperate method for button panning, works great! Now I need to just put it all together so it looks good.
Updated notes and tasks on this page.
Can't get new GEMC to build, with evio from taro/maurik or evio from jlab. It can't link evioxx. I can't even find anything called evioxx.
Out: 3:00PM
</pre>

'''Wed 28'''
<pre>
Arrived 10:15AM
Helping Dan with Command line box
Implemented buttons for panning. Trying to get them in their own box, not working yet.
I see maurizio wants a google-maps like interface. I assume he means drag to pan/rotate and scroll zoom.

I'm going to pick up a book on QT.
Left 12:15
</pre>

'''Fri 30'''
<pre>
Arrived 10:00AM
got latest evio/gemc from taro/maurik
got evio to install, but scons'ing gemc results in the same linking evioxx error

reading through qt tutorial
</pre>


====December====
'''Mon 3'''
<pre>
Arrived 1015
built new gemc, sent code to maurizio
checking out dan's code
future ideas for buttons: pan factor
Out 1215
</pre>

'''Tue 11'''
<pre>
In 1215
Implemented compass-rose type buttons, put into new
code with command box
Implemented pan factor slider
Out 2:15
</pre>

'''Wed 13'''
<pre>
In 100
Implemented coord boxes. Displays current x,y and allows
one to jump to any x,y. What is wrong with phi? Fix it.
Tommorow add reset button. Move on.
Out 300
</pre>


====January====
'''Thur 10'''
<pre>
In 11:30
Got updated code from maurik,
integrating my gui changes into the new code.
Arg! Scons errors. Emailed Maurizio.
Out 12:15
</pre>

'''Tue 15'''
<pre>
In 115
Built g4.9.1, assembly el4/5 32/64 bit builds of all
gemc things.

Gemc will not build. There is a linking error with a QT4 .so
however QTDIR and QTHOME are specified, QTHOME/lib is in 
LD_LIBRARY_PATH, and the .so exists within the directory.
Out 5:00PM
</pre>


'''Wed 16'''
<pre>
In 12:30
Still trying to figure out this linking error.
-seems we need the latest gemc to resolve
building RHEL4_x32 gemc dependencies on pumpkin
Out 4:45
</pre>

'''Mon 21'''
<pre>
In 11:00
GEANT built successfully. Building scons. Got BMS and built EVIO.
SCons and pyscripts are in the main CLAS12 directory.
Getting new GEMC...maurik is writing to JLab for access.
Out 1:00
SSH:
Fixed the scons install. Putting GEMC in my home directory and attempting
to build it from the dependencies on pumpkin2/taro
I thought dan had compiled qt, has not. Moving source to pumpkin and
compiling as in the 'detailed instructions.' http://clasweb.jlab.org/wiki/index.php/Detailed_instructions
</pre>

'''Tue 22'''
<pre>
In 1:15
Recompiling Geant4
I tried compiling it manually but I must be doing something wrong. Using 
the configure script. Everything seems like it built fine.

Whever I scons gemc, it tells me G4UIQt is undeclared, despite G4UIQt.hh being
included in the building of gemc.

"gemc.cc: In function `int main(int, char**)':
gemc.cc:176: error: `G4UIQt' has not been declared
scons: *** [gemc.o] Error 1
scons: building terminated because of errors."
Out 3:30
</pre>

'''Tue 29'''
<pre>
This error must lie either in combining the incorrect G4 and gemc versions,
or in a bad G4 compile. QT I beleive should be compiled correctly.
</pre>