KVM is a Linux-based full virtualization tool which utilizes the virutalization extensions available with several models of Intel and AMD processors.
KVM will only work on systems with processors offer virtualization support. To find out if a system's processor supports virtualization you can look in /proc/cpuinfo for the vmx (Intel) or svm (AMD) flags. This command should do the trick:
egrep '(vmx|svm)' --color=always /proc/cpuinfo
NPG Systems With Virtualization Support
Installing the Software
If you're using a RHEL system you need to enable the virtualization add-on entitlement to your RHEL license. You can install the packages via yum. This is the list of packages you will need:
libvirt-python kvm virt-manager libvirt kvm-qemu-img kmod-kvm kvm-tools python-virtinst
Start the libvirtd service, and configure it to start at boot.
chkconfig --level 345 libvirtd on service libvirtd start
KVM requires bridged networks to be configured manually. The configuration for RHEL 5 systems should look something like this:
DEVICE=eth0 ONBOOT=yes HWADDR=FF:FF:FF:FF:FF:FF BRIDGE=br0
ONBOOT=yes TYPE=Bridge DEVICE=br0 BOOTPROTO=static IPADDR=10.0.0.2 NETMASK=255.0.0.0 NM_CONTROLLED=no DELAY=0
There are some problems (detailed here) with using bridged interfaces and iptables firewalls. There are two solutions to this problem, both of which effectively stop the host machine's firewall from filtering packets destined for the bridges. The first, and preferred solution is to add these values to /etc/sysctl.conf:
net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0
and then run
sysctl -p /etc/sysctl.conf
An alternative solution is to tell iptables to forward packets intended for bridge interfaces using this rule:
-I FORWARD -m physdev --physdev-is-bridge -j ACCEPT
Aliases and Network Bridging
Some systems use network aliases to allow a second IP address on an interface. If the system in question is a VM host with bridged interfaces it can be a bit trickier to add a network alias. Here is an example of an ifcfg script for a network alias attached to a KVM bridged interface:
ONBOOT=yes TYPE=Ethernet DEVICE=farmbr:1 BOOTPROTO=static IPADDR=10.0.0.88 NETMASK=255.0.0.0 NM_CONTROLLED=no ONPARENT=yes
Note that the device name is the bridge interface name with a :1 on the end. This should be the bridge interface, and not the eth# interface for the alias to work correctly. Also, the filename of the alias configuration should be in the form if ifcfg-bridgename:# where bridgname is the name of the bridge interface and the number is the n-th alias that this interface represents. If the filname is not in this format the aliased interface will not come up correctly when the system's network service is restarted. In the case of the previous example the filename must be "ifcfg-farmbr:1", otherwise the alias will not work correctly.
Managing Virtual Machines
The virt-manager utility can be used to add and remove virtual machines, start and stop VMs, view virtual machine details, add and remove virtual hardware, and access the system console.
The virt-manager tool provides a GUI for creating and managing VMs. It's fairly simple and straightforward to use. There are also command line tools.
KVM Command Reference
Creating a new VM
Before creating a VM you need to create a new virtual disk. Use the qemu-img command to specify the image type, file name and size. The typical file type for a kvm system is in the qcow2 format.
qemu-img create -f qcow2 testvm.img 10G
To install a new VM from the command line use the virt-install command. There are a lot of different options that can be given to this command. It's a good idea to review the manual if you plan on creating a new VM this way. There's a really useful detailed list of options at [this website].
Here's one example:
virt-install -v --name=newvm -r 512 --os-type=linux --os-variant=rhel5 --cdrom=/path/to/rhel5-install-DVD.iso \ --disk path=/kvm/newvm.img,size=10 --network=bridge:br0 --network=bridge:br1 --vnc --vncport=5904
The options are specified in such a way that they should be easy to figure out. This command generates RHEL 5 guest using full virtualization (-v) with the name "testvm". The system will have 512 MB of memory, one CPU, a DVD .iso image as a cd-rom drive, and two NICs which utilize bridge interfaces (one for the farm and one for the UNH network, in this case). The system console will also be accessible via a VNC connection over port 5904 on the host system.
If a disk image already exists, simply use the --disk path=/path/to/disk.img option. If the path points to a nonexistent file a new image will be created. If you want to create a new image in this way make sure to add the size option (in Gigabytes). This will create a dynamically expanding virtual disk of that size.
If the command is successful the new virtual system will be created and the console will be opened with the virt-view command.
To control virtual machines from the command line use the virsh tool. It is provided by the package libvirt on CentOS/RHEL systems. Commonly used functions will be listed here. More detailed command options can be found in the virsh manual.
Viewing VM Details
To list all systems available on a host system:
[root@tomato ~]# virsh list --all Id Name State ---------------------------------- 1 testvm running - testvm2 shut off
Start, Stop and Reboot Guest VMs
Add the --console flag after the guest name in this command you want to open a graphical console when the machine starts:
virsh start <guest name>
The shutdown command will instruct the guest OS to attempt a graceful shutdown:
virsh shutdown <guest name>
You can configure guest systems to start when the host system boots. Add the --disable flag before the guest name in the if you want to turn off starting at boot time.
virsh autostart <guest name>
Converting VMWare to KVM
On the VMWare Machine
1. Make a copy of the system's .vmdk virtual disk file.
2. Convert disk to type 2 (preallocated disk) with vmware-vdiskmanager:
vmware-vdiskmanager -r <original>.vmdk -t 2 <newfile>.vmdk
NOTE: This command with create a version of the file called <newfile>-flat.vmdk, this is the one you want to use.
3. Copy the .vmdk file to a machine with KVM.
On the KVM Machine
4. Use qemu-img to convert the vmware disk to a qemu disk image.
qemu-img convert -O qcow2 testvm_copy-flat.vmdk testvm.qcow
5. Create a new VM and attach the image as an IDE disk.
6. The network interfaces have different MAC addresses. Therefore the system needs to be reconfigured to use the new MAC addresses. The display configuration may also need to be changed.
Changing the MAC Addresses
NOTE: Numbers 1-3 do not apply to CentOS 5.
1. Open /etc/udev/rules.d/70-persistent-net.rules
2. Comment out lines for eth0/eth1 with old MAC addresses
3. Replace the old lines with ones with the new MAC addresses so that the interfaces match the device names you would normally expect. They should be something like eth2 and eth3, and you want to change those to eth0 and eth1
4. Make sure the MAC address changes are reflected in the ifcfg-ethX network scripts.