Difference between revisions of "VMware vSphere Hypervisor"

From Nuclear Physics Group Documentation Pages
Jump to navigationJump to search
Line 5: Line 5:
 
[[Pepper]] is currently acting as our test bed for vSphere Hypervisor. [[Tomato]] may become a second test bed if it is needed.
 
[[Pepper]] is currently acting as our test bed for vSphere Hypervisor. [[Tomato]] may become a second test bed if it is needed.
  
 +
I have tested a process by which machines can be moved from VMware Server to ESXi successfully using VMWare converter. This process will be detailed on this page in the near future.
  
 
==Installation==
 
==Installation==
Line 10: Line 11:
 
Installing vSphere Hypervisor is a fairly straightforward process.  
 
Installing vSphere Hypervisor is a fairly straightforward process.  
  
First, you need download the ISO image of the vSphere Hypervisor installer from the [http://www.vmware.com/products/vsphere-hypervisor/overview.html VMware downloads website]. You need an account to access these downloads. Burn this ISO to a disk and boot the system from it.
+
First, you need download the ISO image of the vSphere Hypervisor installer from the [http://www.vmware.com/products/vsphere-hypervisor/overview.html VMware downloads website]. You need a free VMware account to access these downloads. Burn the ISO to a disk and boot the system from it.
  
 
The actual VMWare installer is very straightforward. It will ask you to accept the license agreement, and whether you want to install or upgrade. After that you select a disk onto which you want to install the hypervisor, and the installer will do the rest of the work.  
 
The actual VMWare installer is very straightforward. It will ask you to accept the license agreement, and whether you want to install or upgrade. After that you select a disk onto which you want to install the hypervisor, and the installer will do the rest of the work.  
Line 18: Line 19:
 
[[Image:dcui.jpg]]
 
[[Image:dcui.jpg]]
  
All that you really need to do from this interface is to set the system's root password and configure the Management Network.
+
For a more detailed walkthrough of the installation and configuration with more screenshots see this [http://www.sysadmintutorials.com/tutorials/vmware-vsphere-4/esxi-4/setting-up-vmware-esxi-4/ tutorial].
 +
 
 +
All that you really need to do from this interface is to set the system's root password and configure the Management Network. The management network refers to the network connection that you will use to manage the hypervisor remotely (which should just be the UNH network since you want to manage the machine from somewhere other than the server room). In the case of machines connected only to the farm switch you just need to set the vlan setting to 2 when you configure the management network, and give it the appropriate static IP for the UNH network.

Revision as of 17:16, 13 May 2011

VMware vSphere Hypervisor is VMware's freely available bare metal hypervisor. It may offer a potential replacement for our existing virtualization solution. VMWare offers a free license for vSphere Hypervisor that allows users unlimited use of the basic virtualization features but limits some of the nicer features of VMware like hot-adding hardware to virtual systems, VMotion, and managing virtual machines via a command line interface. The current test setup is using a free license associated with my own account, but a shared vmware account for npg admins will probably be needed in the future to allow each of us access to the web interface at [go.vmware.com go.vmware.com] which offers some useful tools for managing VMware infrastructure.

Current Status

Pepper is currently acting as our test bed for vSphere Hypervisor. Tomato may become a second test bed if it is needed.

I have tested a process by which machines can be moved from VMware Server to ESXi successfully using VMWare converter. This process will be detailed on this page in the near future.

Installation

Installing vSphere Hypervisor is a fairly straightforward process.

First, you need download the ISO image of the vSphere Hypervisor installer from the VMware downloads website. You need a free VMware account to access these downloads. Burn the ISO to a disk and boot the system from it.

The actual VMWare installer is very straightforward. It will ask you to accept the license agreement, and whether you want to install or upgrade. After that you select a disk onto which you want to install the hypervisor, and the installer will do the rest of the work.

Once the install is finished you're presented with a simple text-based interface called the Direct Console User Interface (dcui). here's what it looks like:

Dcui.jpg

For a more detailed walkthrough of the installation and configuration with more screenshots see this tutorial.

All that you really need to do from this interface is to set the system's root password and configure the Management Network. The management network refers to the network connection that you will use to manage the hypervisor remotely (which should just be the UNH network since you want to manage the machine from somewhere other than the server room). In the case of machines connected only to the farm switch you just need to set the vlan setting to 2 when you configure the management network, and give it the appropriate static IP for the UNH network.