Difference between revisions of "Lentil"

From Nuclear Physics Group Documentation Pages
Jump to navigationJump to search
Line 43: Line 43:
 
           collisions:0 txqueuelen:0  
 
           collisions:0 txqueuelen:0  
 
           RX bytes:0 (0.0 b)  TX bytes:10754 (10.5 KiB)
 
           RX bytes:0 (0.0 b)  TX bytes:10754 (10.5 KiB)
</pre>
 
=== /etc/sysconfig/network-scripts/ifcfg-farm ===
 
<pre>
 
# Intel Corporation 82541GI Gigabit Ethernet Controller
 
DEVICE=eth0
 
BOOTPROTO=none
 
#HWADDR=00:0E:0C:4C:E1:52
 
ONBOOT=yes
 
DHCP_HOSTNAME=lentil.unh.edu
 
IPADDR=10.0.0.250
 
NETMASK=255.255.255.0
 
TYPE=Ethernet
 
USERCTL=no
 
IPV6INIT=no
 
PEERDNS=yes
 
 
</pre>
 
</pre>
  
=== /etc/sysconfig/network-scripts/ifcfg-unh ===
 
<pre>
 
VLAN=yes
 
# Please read /usr/share/doc/initscripts-*/sysconfig.txt
 
# for the documentation of these parameters.
 
GATEWAY=132.177.88.1
 
TYPE=Ethernet
 
DEVICE=eth0.2
 
#HWADDR=00:0e:0c:4c:e1:52
 
BOOTPROTO=none
 
NETMASK=255.255.252.0
 
IPADDR=132.177.88.254
 
ONBOOT=yes
 
USERCTL=no
 
IPV6INIT=no
 
PEERDNS=yes
 
 
</pre>
 
 
=== /etc/sysconfig/network-scripts/ifcfg-lo ===
 
<pre>
 
DEVICE=lo
 
IPADDR=127.0.0.1
 
NETMASK=255.0.0.0
 
NETWORK=127.0.0.0
 
# If you're having problems with gated making 127.0.0.0/8 a martian,
 
# you can change this to something else (255.255.255.255, for example)
 
BROADCAST=127.255.255.255
 
ONBOOT=yes
 
NAME=loopback
 
</pre>
 
  
 
== Access Configuration ==
 
== Access Configuration ==

Revision as of 17:18, 1 June 2009

General Information

Lentil performs backups. Its backup script needs further investigation to determine exactly how it works.

Network Configuration

Hostnames: lentil.unh.edu, lentil.farm.physics.unh.edu

Currently connected to the unh and farm networks via the switch and VLAN.

ifconfig

eth0      Link encap:Ethernet  HWaddr 00:23:54:BC:70:F1  
          inet addr:10.0.0.250  Bcast:10.0.0.255  Mask:255.255.255.0
          inet6 addr: fe80::223:54ff:febc:70f1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:30404 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1778 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3723593 (3.5 MiB)  TX bytes:227139 (221.8 KiB)
          Interrupt:66 Base address:0x6000 

eth0.2    Link encap:Ethernet  HWaddr 00:23:54:BC:70:F1  
          inet addr:132.177.88.254  Bcast:132.177.91.255  Mask:255.255.252.0
          inet6 addr: fe80::223:54ff:febc:70f1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:28826 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1032 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3068357 (2.9 MiB)  TX bytes:114723 (112.0 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:99 errors:0 dropped:0 overruns:0 frame:0
          TX packets:99 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:9335 (9.1 KiB)  TX bytes:9335 (9.1 KiB)

virbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:10754 (10.5 KiB)


Access Configuration

 /etc/security/access.conf
 Any valid user can log into lentil from any machine on the Internet.

Backup Configuration

Location of Backups

/mnt/npg-daily/34/

All backup related scripts are:

 /etc/auto.npg-daily
 /usr/local/bin/rsync_backup.pl
 /etc/cron.daily/0rsync_backup
 /usr/sbin/vgcfgbackup
 /etc/rsync-backup.conf

/etc/rsync-backup.conf

# Backups are 'pull' only.  Too bad there isn't a better way to enforce this.
read only       = yes

# Oh for the ability to retain CAP_DAC_READ_SEARCH, and no other.  
#uid            = root
# XXX There seems to be an obscure bug with pam_ldap and rsync whereby 
# getpwnam(3) segfaults when (and only when) archiving /etc.  Using a numeric
# uid avoids this bug.  Only verified on Fedora Core 2.
uid             = 0

# There's not much point in putting the superuser in a chroot jail
# use chroot    = yes

# This isn't really an effective "lock" per se, since the value is per-module,
# but there really ought never be more than one, and it would at least 
# ensure serialized backups.
max connections = 1

[usr_local]
        path    = /usr/local
        comment = unpackaged software

[opt]
        path    = /opt
        comment = unpackaged software

[etc]
        path    = /etc
        comment = conf files

[var]
        path    = /var
        comment = user and system storage

SNMP Configuration

 /etc/snmp/snmpd.conf
 Copied from Pepper.

Smartd Configuration

This configuration file will run smartd to check the status and performance of all the hard drives.

/etc/smartd.conf

# *SMARTD*AUTOGENERATED* /etc/smartd.conf
# Remove the line above if you have edited the file and you do not want
# it to be overwritten on the next smartd startup.

# Sample configuration file for smartd.  See man 5 smartd.conf.
# Home page is: http://smartmontools.sourceforge.net

# The file gives a list of devices to monitor using smartd, with one
# device per line. Text after a hash (#) is ignored, and you may use
# spaces and tabs for white space. You may use '\' to continue lines.

# You can usually identify which hard disks are on your system by
# looking in /proc/ide and in /proc/scsi.

# The word DEVICESCAN will cause any remaining lines in this
# configuration file to be ignored: it tells smartd to scan for all
# ATA and SCSI devices.  DEVICESCAN may be followed by any of the
# Directives listed below, which will be applied to all devices that
# are found.  Most users should comment out DEVICESCAN and explicitly
# list the devices that they wish to monitor.
# DEVICESCAN

# First (primary) ATA/IDE hard disk.  Monitor all attributes
# /dev/hda -a

# Monitor SMART status, ATA Error Log, Self-test log, and track
# changes in all attributes except for attribute 194
# /dev/hdb -H -l error -l selftest -t -I 194

# A very silent check.  Only report SMART health status if it fails
# But send an email in this case
/dev/hde -H -m root
/dev/sda -d ata -H -m root
/dev/sdb -d ata -H -m root
/dev/sdc -d ata -H -m root

# First two SCSI disks.  This will monitor everything that smartd can
# monitor.
# /dev/sda -d scsi
# /dev/sdb -d scsi

# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE
#   -d TYPE Set the device type to one of: ata, scsi
#   -T TYPE set the tolerance to one of: normal, permissive
#   -o VAL  Enable/disable automatic offline tests (on/off)
#   -S VAL  Enable/disable attribute autosave (on/off)
#   -H      Monitor SMART Health Status, report if failed
#   -l TYPE Monitor SMART log.  Type is one of: error, selftest
#   -f      Monitor for failure of any 'Usage' Attributes
#   -m ADD  Send warning email to ADD for -H, -l error, -l selftest, and -f
#   -M TYPE Modify email warning behavior (see man page)
#   -p      Report changes in 'Prefailure' Normalized Attributes
#   -u      Report changes in 'Usage' Normalized Attributes
#   -t      Equivalent to -p and -u Directives
#   -r ID   Also report Raw values of Attribute ID with -p, -u or -t
#   -R ID   Track changes in Attribute ID Raw value with -p, -u or -t
#   -i ID   Ignore Attribute ID for -f Directive
#   -I ID   Ignore Attribute ID for -p, -u or -t Directive
#   -v N,ST Modifies labeling of Attribute N (see man page)
#   -a      Default: equivalent to -H -f -t -l error -l selftest
#   -F TYPE Use firmware bug workaround. Type is one of: none, samsung
#   -P TYPE Drive-specific presets: use, ignore, show, showall
#    #      Comment: text after a hash sign is ignored
#    \      Line continuation character
# Attribute ID is a decimal integer 1 <= ID <= 255
# All but -d, -m and -M Directives are only implemented for ATA devices
#
# If the test string DEVICESCAN is the first uncommented text
# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
# DEVICESCAN may be followed by any desired Directives.

rc.local Configuration

This script is modified to run commands when the system is done powering on.

/etc/rc.local

#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local

#This will send the boot.log to npg-admins everytime the pc is started.
mail -s "$HOSTNAME Started, Here is the boot.log" npg-admins@physics.unh.edu < /var/log/boot.log

Hardware Information

 Motherboard: Asus P5QL-CM
   Specifications: Specifications
   User Manual: V2.pdf Users Manual
 Memory: 2 GB DDR2
 Wake On Lan Command: sudo ether-wake 00:1e:4f:9b:13:90

Fixes