IPMI

From Nuclear Physics Group Documentation Pages
Revision as of 17:36, 26 October 2009 by Maurik (talk | contribs)
Jump to navigationJump to search

IPMI - Intelligent Platform Management Interface

Working with IPMI

Einstein , Pumpkin , and Taro have IPMI cards installed. These cards are accessible from the Farm subnet. Their addresses are:

Einstein: 10.0.0.148
Pumpkin: 10.0.0.143
Taro: 10.0.0.147

You will need to use the ADMIN user account with the system's root password to access the IPMI devices. The SuperMicro cards (Einstein and Taro) both run a web interface to which you can talk directly. Log in as ADMIN with password and you can check the temperatures.

Web view of the IPMI information on Taro

Tools

Supermicro IPMIView

SuperMicro IPMI control software (over LAN) is installed in /opt/SUPERMICRO/IPMIView/ on Taro ( soon to be installed on other machines so it's still usable if Taro is down ). It offers a complete graphical interface for controlling IPMI devices and monitoring sensors. This is the an excellent tool for working with IPMI due to its intuitive graphical interface. To run IPMIView on Taro first connect via ssh using X forwarding so you can run a graphical application:

$ ssh -X username@taro

Next run the IPMIView program in /opt/SUPERMICRO/IPMIView/ as an administrator

$ sudo /opt/SUPERMICRO/IPMIView/IPMIView20.bin

Screenshot of IPMIView monitoring Einstein's sensor readouts:
Supermicro IPMIView screenshot

From here you can select the machine you want to control by double clicking its name in the menu on the left side of the screen. From there you can login to each machine using the ADMIN username and the system's root password.

Command Line

ipmiconsole is a command-line tool for opening a Serial-over-LAN console to remote IPMI enabled devices. It can be installed via the yum repos on Red Hat and Fedora machines with this command:

$ sudo yum install freeipmi 

Currently this package is installed on Einstein, Taro, Pumpkin, and Benfranklin.

ipmitool is a command-line tool for sending IPMI control messages to remote IPMI enabled devices. It can be installed on Red Hat and Fedora machines using this command:

$ sudo yum install OpenIPMI-tools

Web

Einstein and Taro also have web interfaces. Click the links to access them ( your browser needs to be running on a machine that has a Farm connection for these links to work ).

Setup of system

Taro

Taro has a SuperMicro IPMI card installed.

Initial configuration was through the BIOS (under Advanced). Basically, I just plugged in the card, then set the IP number.

Finally in Taro, you need to add a line for the serial console to work. In inittab add the lines:

#
# Run a console on the serial line to the IMPI card
#
T1:2345:respawn:/sbin/mgetty -r -s 19200 ttyS1 
#

And for GRUB you want to add:

...... console=tty0 console=ttyS1,19200n8r

Here is a screenshot of the IPMI monitoring Taro reboot:

Taro ipmi view.jpg

Einstein

Einstein's IPMI card is configured in the same way as Taro's through the system BIOS. At this point it works, but the serial console forwarding is not yet configured. I added the above lines to the inittab and grub configuration files, but it will most likely need to be rebooted first for the settings to take effect.

Pumpkin

Pumpkin's IPMI controller is a Tyan Computer model m3291.

Configuring Pumpkin's card requires a different procedure from that of Einstein and Taro's cards. A full description is available in the official product manual. Currently Pumpkin's IPMI card is not yet completely configured, and at the moment isn't available. It should be ready in the near future. Here is the setup so far:

You will need to use Tyan's uh8l utility to change it's configuration from the command line. I've installed it in /usr/bin on pumpkin.

The first step is to flash the card's firmware with the correct version for the system's motherboard. The firmware package for Pumpkin's motherboard (Tyan S4985) can be downloaded from Tyan's ftp site at this link. I also have a copy of it locally in my home folder ( /net/home/aduston/ipmi ).

Inside the zip file are two other zip files, one is for 4 processors systems, one is for 8 processor systems. Pumpkin's board has four processors, so you will need to use the files in S4985-4P_R20.zip. The firmware files will be extracted to a folder called FW/.

Flashing the firmware is a two-step process. Tyan includes a script, called linuxfls which they claim completes these steps for you, but it didn't seem to work for me. You can do it manually using the uh8l utility with these commands ( make sure to use the correct path to the files if they aren't in your current working directory) :

$ sudo uh8l --sdr 4985r01.sdr --nrst

Then

$ sudo uh8l -u 4985r20.BIN

Now that the correct firmware is installed you can configure the card's IP settings. You need to set the IP, MAC Address, Network Mask, and Default Gateway. This will do it in one command:

$ sudo uh8l -m <MAC address> -i <ip addresss> -n 255.255.252.0 -g 132.177.88.1 

According to the manual the device should detect its own MAC address, but in my experience it did not. I tried giving it the MAC address that was printed on the card, but at this point the network connection isn't working. Further instructions will be added once I resolve this issue and get the network connection working.

Links